Anti-Theft Power Cable, PVC insulated PVC sheathed (ENYCY)
Description
Anti-Theft POWER CABLES 0.6 / 1 KV
Conforming to IEC 60502-1
Description
Conforming to IEC 60502-1
Standards
International : IEC 60228; IEC 60502-1Description
1. SCOPE
This specification covers circular, single, twin, three or four PVC insulated conductors with a concentric conductor over the assembly of cores, rated 0.6/1KV, type NYCY to IEC 60502-1; for use in aerial, direct burial, conduit, open tray and underground duct installations, These cables offer high resistance to ageing, abrasion, moisture, chemicals, oils and acids and afford protection of phase conductors against external ingress.
2. CONSTRUCTION
Conductor
Plain, annealed electrolytic copper conductors, solid, circular stranded, or sectoral stranded conforming to the applicable requirements of IEC 60228.
Insulation
PVC based thermoplastic material conforming to the applicable requirements of IEC 60502-1.
Assembly
Insulated conductors are laid up, filled where necessary with non-hygroscopic material and covered with an additional layer of extruded thermoplastic material or a Polyester binding tape.
Concentric Conductor
Bare, plain, annealed electrolytic copper wires are layed over the common covering of cores with a counter helix of copper tape on top.
Sheath
PVC based thermoplastic material, conforming to the applicable requirements of IEC 60502-1.
Characteristics
| Construction characteristics | |
|---|---|
| Conductor material | Copper class 2 |
| Conductor shape | Circular stranded (RM) |
| Insulating material | PVC |
| Concentric conductor | Copper wires and helical copper tape |
| Outer sheath | PVC |
| Electrical characteristics | |
| Rated Voltage Uo/U (Um) | 0.6/1 kV |
| Operating voltage | 1.2kV |
| Usage characteristics | |
| Bending factor when laying | 10(xD) |
| Minimum installation temperature | -15°C |
| Max. conductor temperature in service | 70°C |
| Short-circuit max. conductor temperature | 160°C |
| Specific characteristics | |
| See all products | |
| |
