Hydrocarbon resistant & Fire retardant, Single core AWA Armored, XLPE insulated, PVC sheathed

Products

EXW 1*300

Nexans ref. EXW 017800 - Country ref. EXW 1*300//FMCC

  • Conductor cross-section: 300 mm²
  • Nominal insulation thickness: 1.8 mm
  • Nominal armour wire diameter: 1.7 mm
  • Nominal outer sheath thickness: 2.0 mm
  • Nominal outer diameter: 33.0 mm
  • Approximate weight: 3322 kg/km
  • Max. DC resistance of the conductor at 20°C: 0.0601 Ohm/km
  • Permissible current rating in open air: 665 A
  • Permissible current rating when buried: 600 A

 

EXW 1*400

Nexans ref. EXW 017801 - Country ref. EXW 1*400//FMCC

  • Conductor cross-section: 400 mm²
  • Nominal insulation thickness: 2.0 mm
  • Nominal armour wire diameter: 2 mm
  • Nominal outer sheath thickness: 2.1 mm
  • Nominal outer diameter: 37.0 mm
  • Approximate weight: 4266 kg/km
  • Max. DC resistance of the conductor at 20°C: 0.047 Ohm/km
  • Permissible current rating in open air: 779 A
  • Permissible current rating when buried: 690 A

 

EXW 1*500

Nexans ref. EXW 017802 - Country ref. EXW 1*500//FMCC

  • Conductor cross-section: 500 mm²
  • Nominal insulation thickness: 2.2 mm
  • Nominal armour wire diameter: 2 mm
  • Nominal outer sheath thickness: 2.2 mm
  • Nominal outer diameter: 41.0 mm
  • Approximate weight: 5355 kg/km
  • Max. DC resistance of the conductor at 20°C: 0.0366 Ohm/km
  • Permissible current rating in open air: 570 A
  • Permissible current rating when buried: 780 A

 

EXW 1*630

Nexans ref. EXW 017803 - Country ref. EXW 1*630//FMCC

  • Conductor cross-section: 630 mm²
  • Nominal insulation thickness: 2.4 mm
  • Nominal armour wire diameter: 2 mm
  • Nominal outer sheath thickness: 2.3 mm
  • Nominal outer diameter: 45.0 mm
  • Approximate weight: 6826 kg/km
  • Max. DC resistance of the conductor at 20°C: 0.0283 Ohm/km
  • Permissible current rating in open air: 995 A
  • Permissible current rating when buried: 880 A

 

Description

Description

Standards

  • International
    IEC 60228; IEC 60332-1-2; IEC 60332-3; IEC 60502-1

1. SCOPE

This specification covers XLPE insulated, circular, single core armoured cables, rated at 0.6/1 KV according to IEC 60502-1 for use indoors, outdoors, in cable ducts and for direct burial underground, where severe mechanical stresses are present.

 

2. CONSTRUCTION

2.1 Conductor

Plain, annealed electrolytic copper conductors, circular stranded, conforming to the applicable requirements of IEC 60228.

2.2 Insulation

XLPE thermosetting material, conforming to the applicable requirements of IEC 60502-1.

2.3 Inner Sheath

Special Hydrocarbon resistant and fire retardant PVC based thermoplastic material, conforming to the applicable requirements of IEC 60502-1.

2.4 Armour

Aluminum wires completely covering the assembly of cores complying to the applicable requirements of IEC 60502-1.

2.5 Sheath

Special Hydrocarbon resistant and fire retardant PVC based thermoplastic material, conforming to the applicable requirements of IEC 60502-1.

2.6 TESTS

Conforming to the applicable requirements of IEC 60502-1 either on Raw materials or on finished products.

TEST AT WORKS ACCORDING TO IEC 60502-1 & IEC 60332-3

Routine Tests

 -          Max. DC conductors resistance at 20°C acc. to IEC 60228 & IEC 60502-1 parag. 15.1 & 15.2

 -          Voltage test acc. to IEC 60502-1  parag.15.1& 15.3

 

Liban Cables will carry out these tests on all the lengths and tests certificates will be provided.                                                                

 

Sample Tests

 -          Check of the build - up and color coding of the cable

 -          Check of dimensions

            Insulation          :           according to IEC 60502-1                      Parag.  16.5.2

            Armour             :           according to IEC 60502-1                       Parag.  16.7

            Oversheath       :           according to IEC 60502-1                      Parag.  16.5.3

 Hot Set Test for XLPE insulation: according to IEC 60502-1                 Parag.  16.9

 

These tests will be carried out on one length of each size during each inspection .

Tests certificates will be provided by Liban Cables

 

Type Tests

Mechanical characteristics on insulation and sheaths material (tensile strength and elongation at break ) in accordance with IEC 60502-1.

Fire retardance test according to IEC 60332-3.

These tests will be carried out on one length of the order.

Tests certificates will be provided by Liban Cables.

DRAWING SINGLE CORE, AWA ARMORED CABLE

Characteristics

Characteristics

Construction characteristics

Construction characteristics

Conductor material
Copper
Conductor shape
Circular
Insulation
XLPE
Armour type
Aluminium Wire
Outer sheath
Special PVC compound

Electrical characteristics

Electrical characteristics

Test voltage
3500 V
Rated Voltage Uo/U (Um)
0.6/1 kV

Mechanical characteristics

Mechanical characteristics

Cable flexibility
10xD

Usage characteristics

Usage characteristics

Operating temperature, range
-15 - 55 °C
Installation temperature, range
-5 - 50 °C
Ambient air temperature
30 °C
Maximum operating temperature
90 °C
Short-circuit max. conductor temperature
250 °C
Flame retardant
IEC 60332-1-2
Fire retardant
IEC 60332-3
U.V resistance
Yes

Resources

Resources

Contact us

Topics on which you wish to get more informations:

Required fields*

Please check your entry and try again.

An email address must contain a single @

Personal data protector

You have the right to object to the processing of your personal data and/or their use for direct marketing or commercial purposes

Thank you!

Thanks for contacting us. We will be in touch with you shortly.

Error

An error occurred. Please try again.

Close