Single core Cu Cond. CWS, Lead, AWA and fire retardant PVC Sheath+AT

Routine Tests

- Max. DC conductors resistance at 20°C acc. to IEC 60228 & IEC 60502-2 parag.16.1& 16.2  

- High voltage test acc. to IEC 60502-2  parag. 16.1& 16.4                                                          

- Max. partial discharge test  at 1.73 Uo acc. to IEC 60502-2  parag.16.1& 16.3  

( The test voltage shall be raised gradually to and held at 2U0 for 10s and than slowly reduced to 1.73U0).  

Liban Cables will carry out these tests on all the lengths and tests certificates will be provided

Sample Tests

- Check of the build - up and color coding of the cable

- Check of dimensions

            Insulation                      :           according to IEC 60502-2                       Parag.  17.5.2

            Metal sheath                 :           according to EEMUA 133                       Table    1

            Separation sheath         :           according to IEC 60502-2                       Parag.  17.5.3

            Armouring                     :           according to IEC 60502-2                      Parag.  17.7

            Oversheath                   :           according to IEC 60502-2                       Parag.  17.5.3

- Hot Set Test for XLPE insulation          according to IEC 60502-2                       Parag.  17.10

- Voltage test for 4 hours.          

These tests will be carried out on one length of each size during each inspection .

Tests certificates will be provided by Liban Cables

Type Tests

Mechanical characteristics on insulation and sheaths material (tensile strength and elongation at break  ) in accordance with IEC 60502-2.         

Fire retardance test according to IEC 60332-3.                                                               

These tests will be carried out on one length of the order .

Tests certificates will be provided by Liban Cables